The same type of forging equipment-power press is used in many different industries. The equipment has a very strong process applicability. No matter in which industry, it can exert its corresponding forging capacity, precisely because of the increasing use However, after using for a long time, there will be many different problems that affect the normal use. For example, the product 0010010 #39;s lubrication system is not good. At this time, we need to adopt a certain lubrication method to solve it.
1. Dilute oil centralized lubrication: Most cases of thin oil centralized lubrication are pressure circulation lubrication. Generally, the lubrication station is placed next to the base of the power press or in the pit, and the gear pump is used to send the lubricant to each lubrication point through the control valve.
2. Thin oil dispersion lubrication: There are two types of thin oil dispersion lubrication: manual lubrication and automatic lubrication. Manual lubrication is generally only used on small parts that do not move frequently, and it is not easy to connect parts that are supplied by centralized lubrication stations or parts that are not easy to recover, such as cams and rollers. Thin oil dispersion and automatic lubrication are commonly used in mechanical presses with oil pool lubrication and oil mist lubrication.
3. Dry oil centralized lubrication: There are two types of dry oil centralized lubrication: motor oil pump and manual oil pump. Motorized oil pumps are generally placed on top of power presses, and some are also installed next to the base. The manual oil pumps are installed on the uprights where it is easy to operate.
0010010 nbsp;
